background image

   EFHP-2000 

 
 
 
 
 

 

Owner’s Manual 

Instructions for Assembly, Testing, Operation, Servicing, and Storage 

 

12V Plunger Pump

: For use with non-potable liquids such as water-based 

agricultural pesticides and other liquids** 

 

WARNING 

 

READ and UNDERSTAND the Owner’s Manual completely before using this pump

.  

Assemble, test, and use only in accordance with the Owner’s Manual instructions. 

 

READ and FOLLOW chemical safety instructions.

  Pesticides are hazardous chemicals.  

 

KNOW emergency procedures BEFORE handling chemicals.

  Pump leaks, bodily chemical 

contact, poisoning, and spills require immediate response.  

 

AVOID inhaling, ingesting, or coming into contact with any chemicals.

  

 

WEAR personal protective gear when operating, cleaning, and servicing the pump. 

 

 

KEEP pump and spray materials away from children and pets.

  Pesticides are especially 

toxic to them.  

 

DO NOT TURN ON POWER to pump until ready to spray

 in order to avoid unintentional 

spray release.  

 

ALWAYS 

keep a fire extinguisher rated “ABC” nearby.  

 

Improper use of the pump or handling of chemicals could result in serious injury or 
illness to the operator or nearby persons/animals, or could cause damage to the 
environment.

 

 

 

**

 This pump is recommended for use in spraying non-flammable liquids such as pesticides, water 

for plants/trees or dust control, or water-based non-flammable sealants or stains for outdoor wood 
surfaces.  This pump should not be used to transfer any product intended for human consumption. 
WE RECOMMEND THAT THE PUMP NOT BE USED FOR OTHER PURPOSES ONCE IT HAS 
BEEN USED FOR SPRAYING PESTICIDES.  Any chemical will leave some residual in the pump, 
even after the pump has been properly cleaned.  These residual chemicals can have unexpected 
effects on future uses.  For example, spraying water or other liquids that are contaminated with 
residual pesticide may result in unforeseen hazards to plant or animal life. 

This pump should not be 

used by people with reduced physical, sensory or mental capabilities or lack of experience and 
knowledge.

 

 
 

Any Questions, Comments, Problems, or Parts Orders 

Call Everflo Product Support 1-800-864-1649

ITEM NUMBER:  EFHP-2000 

 

SERIAL NUMBER: __________

 

Содержание EFHP-2000

































Отзывы: