Everfit WBK 600 FLEXI FIT, Инструкция, Страница: 5 / 9

6
G.Attach the Backrest Support Frame (#8) to the U Shaped Bracket on the mid of the Seat Pad
Support Frame (#2), Align the hole and secure with one M10X 72 MM Allen Bolt (#33), two Ø10mm
Washers (#33) and one M10 Aircraft Nut (#37).
H.Attached the Backrest Incline Support to the U-Shaped Bracket on the Seat Support Frame, adjust
to the desired incline and insert the Lock Pin (#11).
I. Attach the Butterfly Frame (#9) to the two Angle Select Plates on the back of the Backrest Support
Frame (#8). Secure each of them with one Ø10mm Washer (#27) and one M10 Aircraft Nut (#37).
Screw the two M18 Lock Knobs (#12) through the hole on the side of the Butterfly Frame (#9) and
the hole on the Angle Select Plate, get the desired angle of the two Butterfly Frames (#9) and
tighten.
J. Attach the Seat Pad (#15) to the Seat Support Frame (2), align the holes and secure with four
M6X35MM Hex Bolts (#29) and four Ø6MM Washers (#25).
Diagram 3
STEP 4 (See Diagram 4)