SAFETY GUIDES
1.
Before operation, please fully read and follow all instructions in the manual.
2.
The camera power input range is 100-240 VAC (50-60Hz), ensure the power supply input
within this rate before powering on.
3.
The camera power voltage is DC12V/8W. We suggest you use it with the original power
supply adapter or use PoE+ (IEEE802.3at) compatible switch.
4.
Please keep the power cable, video cable and control cable in a safe place. Protect all
cables especially the connectors.
5.
Operational environment: 0
℃
-50
℃
, humidity less than 90%.To avoid any danger, do not
put anything inside the camera, and keep away from the corrosive liquid.
6.
Avoid stress, vibration and damp during transportation, storage and installation.
7.
Do not detatch the camera housing and cover. For any service, please contact authorized
Everet technicians.
8.
Video cable and control cable should be individually shielded, and cannot be substituted
with other cables.
9.
Do not direct the camera lens towards strong light, such as the sun or the intensive light.
10.
Use a dry and soft cloth to clean the camera housing. Applied with neutral cleaning agent
when there is need to clean. To avoid damage on the camera lens, never use strong or
abrasive cleaning agents on the camera housing.
11.
Do not move the camera by holding the camera head. To avoid mechanical trouble, do
not rotate the camera head by hand.
NEVER MOVE THE CAMERA MANUALLY WHEN IT IS WORKING.
12.
Put the camera on fixed and smooth desk or platform, avoid leaned installation.
13.
Power Supply Polarity (Drawing)
Note:
The video quality may be affected by the specific frequencies of
electromagnetic fields.
Never grasp the head of the camera, and never move the camera by
hand when it is working, otherwise the camera will breakdown.
2
WWW.EVERETIMAGING.COM
