LPD Pen User Manual
Accessories
1. LPD Pen
2. USB Dongle
Connector
Lid
USB Charge
Pair Button
Page Down
Page Up
Laser Button
1.「LPD Pen」Menu Illustration
When the tip touch the screen, signal from the tip transmit
To the CMOS sensor inside the Projector
。
When signal transmit, the pen tip will glow
。
There is a sensor inside the tip, when the tip is touched which will
consume the battery power
。
For saving the power put the lid back to
the tip when not using
。
2.「USB Recharge」Illustration
For battery recharge first time use the LPD Pen, please recharge the
battery for two hours
。
a.If the battery hasn’t been used for a long time ,please recharge the
battery for a period of time
。
1)Tip can be put anywhere on the screen
。。
2)When tip touch the screen ,you can start to draw
。
b. When the LPD pen touch the screen, the tip doesn’t glow, it means
low battery, please recharge it before using it for a period of time
。
Method: Open the pen LPD pen connect the USB charge connector to
the computer USB socket or to USB battery charger
。
3.「USB Dongle」Illustration
Plug in USB dongle :
USB dongle use USB Interface , plug and play
。
1. Search for Computer USB port
。
2. Plug USB dongle into Computer USB port
。
Illustration
Attention
P/N:1335xxxx
