5
7
Charge/USB
Port
Connect USB line.
8 HDMI port
Use the D data line to
connect the TV
2. Inserting SD card
Insert SD card with the metal contacts facing down and the cut
corner aligned with that of the slot.
3.
Charging the battery
New batteries are shipped partially charged. Before you can
use your pad, you need to charge the battery. Some batteries
will have best performance after several full charge/discharge
cycles.
1.
Connect data cable and charger, plug one end into your
pad’s data port.
2.
Plug the other end of the charger into the appropriate
electrical outlet (100~240V AC).
3.
When your pad indicates that the battery is fully charged,
remove the charger.
Notes:
1.
Before charge, make sure the battery is installed in the
pad.
2.
The battery can discharge gradually even when your
pad is powered off. If the battery is drained for a long
time, the information stored in the pad could possibly be
lost. So even you don’t need to use your pad for a long
period, you should charge the battery some times to
keep it away from drained.
3.
You need longer charging period with the lower voltage.
4.
You need longer time as operation as charging.
5.
The nomal charge temperature is during 0
℃
-40
℃.
6
4.
About the Status bar
Icon
Indicators
The alarm has been set.
Receive a new email.
Receive a error message.
Indicates
being
in
sync.
Indicates the Bluetooth is using。
Indicates downloading.
Indicates the USB is connected.
Indicates the WIFI sigal strength.
