When installing the unit, be careful that the
electrical cord is not under the unit or
pressed against the wall.
This could cause
damage to
the cord.
Before starting the unit for the first
time, make sure the unit
is free from all packaging.
Packaging left
on the unit
during
operation may
cause a fire hazard.
To prevent electrical shock, please do
not plug or unplug the cord
with wet hands.
WARNING -
When using your appliance, always follow basic precautions, including
the following :
Install the unit on a hard
and level surface.
Before cleaning or maintaining the unit,
please unplug it. Do not use any
flammable
cleaning
products
on or
around
the unit.
Please do not store temperature
sensitive items in the unit,
such as medical or
science research
related materials.
If you suspect a refrigerant leak,
unplug the unit and
immediately contact an
authorized service
technician.
Please do not hang or climb
on the unit as this may
cause the unit to fall.
2
Safety Notices
Safety Notices
To minimize shock and fire hazards, be sure
not to overload the outlet into which the
unit is plugged into. A dedicated circuit of
sufficient amperage is preferred.
To prevent electrical shock and
malfunction, do not spray the
unit with water.
Clean the pronges of the electrical plug
with a soft cloth or brush before plugging
it into an electrical receptacle to prevent a
fire hazard.
WARNING -
Read and follow all safety notices in this installation guide.
These notices provide helpful safety and efficient operation
information. Failure to do so may lead to serious injury and /
or damage to the unit.
When it is time to salvage the unit, make
sure to remove the rubber gaskets from
the doors to prevent the risk of children
or animals getting trapped inside the
unit.
1
Safety Notices
Safety Notices
MANUFACTURING
MANUFACTURING
