EVEREST REFRIGERATION EMGR10B, Руководство пользователя

Страница: 23 / 30

Door Reversal Instructions 20
1.
The top signboard
A
and front bottom grill
B
must be removed to access the door hinge mounting
screws. Detach the top signboard by removing 3 top and 2 bottom screws.
2.
Detach the bottom grill by removing 2 bottom and 4 side screws and sliding the grill down until released.
3.
Remove 6 reserve screws from pre-drilled holes
C
. The pre-drilled holes and screws will be used in
mounting the reversed (left) door hinges (
F
,
D
) later.
8. Door Reversal Instructions
This section applies only to models EMGR20, EMGR24, EMGR24B and EMGR24C. Door reversals must
be performed by qualified technicians. A second person is required. Safety goggles must be worn to
protect from spinning parts. Warranty is void if the following guidelines are not met
Before After
E
B
A
C
D F
F D