EVEREST DISPLAY SO452U, Руководство пользователя

Страница: 52 / 82

52
Expand
This function returns all setting values except
for the User logo, PIN code lock, Logo PIN
code lock, Lamp counter and Filter counter to
the factory default settings.
This function resets the counter of Lamp usage
hours.Please be sure to reset the lamp counter
after replacing the lamp. WARNING indicator
turns Off and the lamp replacement icon disap-
pears after reset the lamp counter.
Press < MENU > button on the remote con-
troller or on the top control panel to display
the OSD menu. Press
ST
button to select the
Expand menu, then press <OK> or
X
button .
1) Press button to select [Lamp counter]
menu.
2) Press <OK > button.
3) Press button to select [Lamp counter
reset], then press <OK> button.
4) " Lamp replacement counter reset ? "
conformation box appear.
5) Select "Yes" and Press <OK> button.
Factory default
Lamp Counter Reset
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter reset
Lamp counter
(3) When DHCP is set On, IP address, Subnet,
Gateway and DNS will be obtained
DXWRPDWLFDOO\SUHVVWKH2.DW6HWWRFRQ¿UP
the parameters.
When DHCP is set Off, press the OK button to
enter IP address, then press
T
button to enter
Subnet, Gateway and DNS respectively,
SUHVVWKH2.DW6HWWRFRQ¿UPWKHSDUDPHWHUV
9
Note:
6HHSDJHIRUXVDJHRI1HWZRUN
ENTER
192 168 1 100
Network setting
DHCP Off
Set
Cancel
IP address
Subnet
Gateway
DNS
Adjust Select Back
LAN
Esc
255 255 255 0
192 168 1 1
192 168 1 100
192 168 1 1