background image

EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair 

3

INTRODUCTION

Thank you for choosing an Everest & Jennings product. We at GF Health Products, 
Inc. (“Graham-Field”) wish to assure you of our continuing commitment to provide 
innovation and quality in our products. Important safety, operating, and maintenance 
instructions that warrant the attention of both user and attendant are included in 
this operation manual. Read the entire manual carefully before operating your new 
EJ777-3 Transport Chair, keep it handy for future reference, and refer to it as often as 
necessary to help maintain good performance standards.
Consult your healthcare professional and GF authorized distributor for assistance 
in developing and learning safe and effective techniques for performing your daily 
activities according to your individual physical abilities and needs, and to make 
certain that your Transport Chair is properly prescribed and adjusted for your use.
The safety precautions in this manual are general warnings intended to be used only 
as basic guidelines. You may find it necessary to develop your own methods for 
safely solving frequently encountered challenges. Again, consult your professional 
medical advisors for their recommendations about safety methods, and never 
hesitate to ask for their assistance.
Your Transport Chair should receive frequent, regularly scheduled maintenance, 
including an inspection of the mechanical parts, to ensure proper operation. Some 
suggested inspection procedures, troubleshooting procedures, and adjustment 
procedures are included in this manual. When it comes to service and repair, 
remember that your GF authorized distributor knows your Transport Chair best.
The person performing adjustments on the EJ777-3 Transport Chair has the 
responsibility of making certain that the user can safely operate the Transport Chair 
with the adjustments selected. This person must evaluate the user's ability, weight, 
physical condition, the environment in which the Transport Chair will be used, and 
the terrain over which the Transport Chair will travel.

INTENDED USE

The EJ777-3 Transport Chair is a manual, folding, lightweight Transport Chair, 
suitable for frequent users with a maximum weight capacity of 400 lb (182 kg) who 
require a lightweight, portable Transport Chair, fitted to their anatomy, without the 
need of customization or alteration to the center of gravity. The EJ777-3 Transport 
Chair is intended for indoor and/or outdoor use. The EJ777-3 Transport Chair is 
intended to be propelled by an attendant at all times, who should remain behind the 
Transport Chair when the user is being positioned or the Transport Chair is in use.

Содержание EJ777-3





























Отзывы: