EVEREADY Kestrel 1112-3500-048, Руководство пользователя

Страница: 16 / 54

Document No. 1112M001 Revision 1.8 Date: June 2013
16
4.4 Tail Boom Weld Assembly to the Generator
PARTS LIST
ITEM QTY DESCRIPTION
8 1 Tail Boom Weld Assembly
9 2 M12 Tail Boom Bolt, washer and nut
10 8 M12 Allen cap bolts and washers
11 1 Tail Boom Flange
12 1 Generator
13 1 Pitch Control
THE GENERATOR SHOULD BE FITTED ON THE TOWER
BEFORE FITTING THE BOOM ASSEMBLY TO THE
GENERATOR.
FIT ALL THE FASTENERS BEFORE TIGHTENING AND
ASSEMBLE EXACTLY AS SHOWN IN THE DIAGRAM.
Take note of the “this way up” orientation indicators on each
component.
You need the fastener pack marked “Tail Boom weld Assembly” for
this work.
►
Fit the flange weld assembly (11) with yellow bushes to the rear
end of the generator (12) using the 8 M12 bolt sets (10). Torque to
50Nm (36ft lb)
► Fit the boom (8) to the flange weld assembly (11) using the 2 M12
bolt sets (9). Torque to 50Nm (36ft lb).
►
Store the remaining fasteners for later use.