EVEREADY B1-5.1-48, Руководство пользователя

Страница: 17 / 24

15
www.solarsg.com.au
USER MANUAL
Figure 4.2.1 removing wiring cover
Figure 4.2.2 Threading diagram
4.2 Connection Ways to Secondary
Ensuring the circuit breaker is off, remove the screws on the right wiring cover,
then pull out the cable connected to the BMS switch and put the cover aside by
the equipment.
Remove the flange nut head in a counter-clockwise direction and remove one plug
as shown in the picture (left) below. After that, wire the original cables through to the
waterproof jacket as showing below (right):
Note: 3 cables should be used to connect to one Secondary in a way like BAT+—BAT+,
BAT-—BAT- and LINK—LINK. Be careful during the installation.
Do not wire the cables the wrong way by reversing the battery positive and
negative terminal.