DESIGNED TO PERFECTION
INSTALLATION OF THE EVERDURE RBES62/RBES62B RANGE HOOD TO A CABINET
The diagram below shows the distance required between the holes in the top of the range hood. Due to
manufacturing procedures, it is recommended that the dimension be checked on the range hood before
installing. Please note that the exhaust air MUST flow through the opening at the top of the unit, either via
flexible ducting to the outside, or into the room through the cupboard itself (using optional charcoal filters).
Drill the 6 x Ø4mm mounting holes & Ø130mm venting hole into the bottom of the cupboard. For a ducted
installation, drill a Ø120-Ø130mm hole for the ducting to exit. For a recycling installation, a Ø120-
Ø130mm hole should be cut out at the top of the cabinet to allow the exhaust to re-enter the room.
Fit the one way valve onto the range hood.
Install the range hood to the bottom of the cupboard using the screws supplied with the range hood. The
holes in the range hood are already threaded. Fully tighten the screws. Install the flashing plate supplied
with the range hood, to the back of the range hood and underneath of the cupboard. This is used to hide
any gaps that may exist after fitting the range hood. Ducting & charcoal filters can then be fitted (if needed)
before the unit is connected to the power supply & turned on.
See diagram below for any clarification required.
OPERATING INSTRUCTIONS
Note: Before the unit can be operated, it must either be ducted or, if the model is installed as a re-circulating
range hood, it must be fitted with charcoal filters.
Connect the plug into the power.
Below is a diagram of the light and fan functions, with an explanation of how the light and the fan functions
operate.
To operate the light, push the switch
①
into “I” position to switch the light on, or into “0” to turn the light off.
To operate the fan, push the switch
②
onto either:
I – Low Fan Speed
II – Medium Fan Speed
III – High Fan Speed
0 – To turn the fan Off.
If your range hood does not function correctly when attempting any of the above, please ensure that your
power is on and is functioning correctly. If the power seems to be functioning correctly in the house, there
may be a problem with the range hood. Please call your authorised service centre in this case to organise a
service call or replacement unit.
6