4
EASY DECISION
INSTALLATION INSTRUCTIONS
INSTALLATION OF THE EVERDURE RBES612 RANGEHOOD TO A CABINET
The diagram below shows the distance required between the holes in the top of the rangehood. Due to
manufacturing procedures, it is recommended that the dimension be checked on the rangehood before
installing.
Drill the 4 x 6mm diameter holes into the bottom of the cupboard.
Fit the one-way valve onto the rangehood, ready for installation of the ducting.
Install the rangehood to the bottom of the cupboard using the 35mm bolts & nuts supplied with the
rangehood. The holes in the rangehood are already threaded. Fully tighten the bolts.
OPERATING INSTRUCTIONS
Note
: Before the appliance can be operated, it must either be ducted or, if the model is installed as a
recirculating rangehood, it must be fitted with charcoal filters.
Connect the plug into the power.
Below is a diagram of the light and fan functions, with an explanation of how the light and the fan
functions operate.
To operate the light, push the switch
①
into “1” position to switch the light on, or into “0” to turn the light off.
To operate the fan, push the switch
②
onto either:
1 – Low Fan Speed
2 – Medium Fan Speed
3 – High Fan Speed
0 – To turn the fan Off.
If your rangehood does not function correctly when attempting any of the above, please ensure that your
power is on and functioning correctly. If the power seems to be functioning correctly in the house, there may be
a problem with the rangehood. Please call your authorised service centre in this case to organise a service call
or replacement appliance.