DESIGNED TO PERFECTION
Turning Off Individual Cooking Zones
A particular cooking zone can be turned off in 2 different ways:
A) Selecting the cooking zone & then simultaneously pressing the
Increase Heat Setting Button
and
Decrease
Heat Setting Button
, after which a beep signal sounds and “0“ appears in the Heat Level Display.
B) Reduction of the heat setting to “0“ by operating the
Decrease Heat Setting Button
. When this happens, the
associated
Decimal Point
of the cooking zone will also be turned off. If there is residual heat from this hotplate
remaining, a red ´H` will be shown in the Heat Level Display area.
The Boost Function
The
Boost
function is available at each cooking zone. It is used to speed up the initial heat up time (say boil a
pot of water). Select a cooking zone and set the temperature. While the decimal point on the display is lit, press
the
Boost
button. The display will alternate between “P” and the heat setting.
Note: The
Boost
function is not always available (depending on what else is being used), and if the power
requirements are exceeded, the display will flash with an alternative setting for 3 seconds. Do not leave the
appliance unattended while this function is active.
To disable the
Boost
function, press the
Heater Selection Button
for the cooking zone again (so the
Decimal
Point
is lit) and adjust the temperature setting with
Increase Heat Setting Button
or
Decrease Heat Setting Button
.
The display will no longer alternate between “P” and the heat setting.
Locking The Keys
The child lock is used to set the appliance up so when it is first turned on, it is in a locked mode (which must be
unlocked before a cooking function can take place). While locked, touch modifications (e.g. increase heat
settings) and others will not be possible. It is only possible to switch the appliance off.
Turn the appliance on, but do not activate any functions. Press the
Increase Heat Setting Button
and
Decrease
Heat Setting Button
together, and then the
Increase Heat Setting Button
again. The display shows an “L” on all
cooking zone displays (or alternating ”H” & “L”) and will remain locked even if the unit is turned off & on.
To unlock the unit, press the
Increase Heat Setting Button
and
Decrease Heat Setting Button
together, and then
the
Decrease Heat Setting Button
again. The “L” displays will switch back to the heat settings and will not be
active when the unit is next turned on.
The
Key Lock button
can be used to stop access to any functions (except the
On/Off
function) while the cooktop
is being used. Once the cooktop has been set up to cook, press the
Key Lock button
for 2 seconds until there is
an audible alarm and the key lock symbol will be lit. Repeat the process to remove the key lock (the key lock
symbol will no longer be lit). If the unit is turned off & on, the key lock will remain active.
The Smart Pause Function
This function reduces the power of all cooking zones for 30 minutes (at which point the appliance will turn off).
Activate by pushing the
Smart Pause Button.
The displays will alternate between “ " “ and their correct reading.
Turn the function off by pressing the button a second time.
9
9
9
