background image

 

 

     EASY DECISION 

After having installed the appliance, the power switch or power plug must always be in an accessible 
position. 
 
 
 
 
 
Electrical connection diagram 
N.B For connections to the mains power supply, never use adapters, reductions or multiple power points as 
these may overheat and catch fire. 
In the event that installation should require modifications to the mains supply wiring system or if the power 
plug is not suitable for the type of power point available, it is required that a qualified technician be called 
to carry out substitution. 
The technician will also have to verify that the cross-section of the electric cables on the power point match 
the appliance’s power rating.   
 
 

INSTALLATION 

 

Note: These tops are designed to be fitted into kitchen fixtures measuring at least 600 mm in depth.    
In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown on the cutting 
size board has to be made, keeping in consideration the following: 
Within the fixture, between the bottom side of the cooker top and the upper surface of any other appliance 
or internal shelf there must be a clearance of at least 30 mm;  
Keep at least 200mm from the periphery of the burners to any side or rear wall with combustible surfaces or 
keep the appliance sides at least 50mm from walls with non-combustible surfaces. 
There must be a distance of at least 650 mm between the hob and any extractor hood or wall cupboard 
positioned immediately above it. 
It is essential to install a heat baffle between the bottom of the hob and the underlying unit.    
The duplicate data plate should be fixed in an accessible position close to the appliance (inside face of 
cupboard door, side of cabinet etc). 
 
 
 
 
 
 
 
 
 
 
Note: Keep a safe distance away from combustible constructions.   
After installation, all burners should be tested individually and together to ensure correct operation. 

Содержание CBGS711













Отзывы: