2.0 Control Keypad Functions
Turn On the Keypad console press
ON
OFF
. The LCD screen should become active.
2.1 Initializing the System at every Start-up.
To do this, locate the Code label on the Keypad console (located upper right corner in Figure 2A and bot-
tom middle in Figure 2B); the code 77 is used for illustration. Press
CODE
the code
7
7
then
ENTER
. The LCD should change. Note: Gray keys are displayed on console only.
2.2 Set Up Brightness and Dimming
Keypad in Figure 2A only:
Press
SET
UP
will start the dimming option, the LCD will display Dimming 1 to 4 levels of brightness, with
4 being the brightest. Press
3
(1, 2, 3 or 4) then
ENTER
then
CLEAR
.
Press
ENTER
to go through the steps of Set Up (most are not used for Baseball) until LCD reads “Time of
Day =”. Enter the correct time (example,
3 2 2
will display 3:22), then press
ENTER
.
Keypad in Figure 2B only:
Pressing
DIM
once will change the brightness/dimming one step through 4 levels of brightness.
2.3 Scores
The Home and Guest Scores can be changed in two ways.
1. Press
+1
under either Home or Guest Scores to increase the score by 1 number.
2. To enter or change a score using the numeric keypad under Home or Guest press
SCORE
then enter the score (
2
will change the score to 2) then press
ENTER
.
To Clear a score, under Home or Guest press
SCORE
then
CLEAR
.
2.4 Innings
Press
INNING
then,using the numeric keypad, press the inning number and press
ENTER
.
To Clear Inning display press
INNING
then
CLEAR
.
2.5 Balls, Strikes and Outs
Change this display by pressing
BALL
or
STRIKE
or
OUT
. Each time a button is pressed the display
will increase one; 1 to 2, 2 to 3 and so on.
2.6 Hit, Error and At Bat
Push
HIT
or
ERROR
to increment the appropriate indicator. Press
AT
BAT
to toggle between the team
at bat (displayed only on the console).
