7
HOMEDEPOT.COM
Please contact 1-844-241-5521 for further assistance.
Operation
NOTE:
Make certain you unwind the garden hose completely. Kinks in the hose will restrict the pump, preventing it from priming, which is the
first step to pumping water. This pump has water detector sensors. As long as the water level is over1-1/4 in., the pump will automatically
start operating.
1
Plugging in the pump
2
Operating the pump
WARNING:
Do not allow the plug to fallin water and do not
stand in water while the pump is plugged in.
If the water level is over 1-1/4 in., the pump will automatically
start and pump out water until the water level is down to
1/4 in.
WARNING:
Do not handle the pump or pump motor with
wet hands or when standing on a wet or damp surface, or in
waterwhile the pump is plugged in.
NOTE:
The pump will not start working unless the water
level is over 1-1/4 in.
NOTE:
Place upright on a solid base.
Place the pump on a solid base in a flooded area or any place
that you would like to remove water. Plug the pump into a 115
volt GFCI power outlet.
