Ever Power Systems POWERLINE 11 series, Инструкция по эксплуатации

Страница: 5 / 27

POWERLINE 11 series UPS – Instruction Manual
2011/07/22
www.ever.eu
5
No. Symbol Name Description
1 SELECT
If the unit is in BYPASS mode or zero mode (STANDBY), pressing this button
allows you to configure the unit’s parameters: output voltage, frequency,
BYBASS mode options. To approve the selection, press ENTER (2)
2 ENTER
If the unit is in BYPASS mode, parameters set by means of the SELECT key
may be approved by pressing ENTER.
3 OFF
When the power supply is regular, pressing the OFF button causes the unit to
switch to BYPASS mode and turns off the inverter. If the BYPASS mode option
is available, the outlet is powered from the BYPASS line
4 ON
Turns the unit on
Deactivates sound alarms.
5 - LCD LCD
Display Description
Input
Input voltage value
Input voltage frequency
Indicates excessively high input voltage; not displayed if the voltage is regular
Indicates excessively low input voltage; not displayed if the voltage is regular
Output
Output voltage value
Output voltage frequency
Load
Unit load in W or VA
Indicates short-circuit of the unit’s output
Indicates unit overload
Storage cells
Storage cells voltage value
Charge level of storage cells
Indicates overload of the storage cells; the unit will switch to battery mode
Indicates that the storage cells are discharged; the unit will soon switch off
Mode/Error/Warning
Displays the unit’s mode, error codes and warnings
Inverter
Indicates the operational status of the inverter
Bypass
Indicates the operational status of the BYPASS circuits
Output voltage, frequency, BYBASS mode option
If the unit is in STANDBY or BYPASS mode, one of the four output voltage values may be
selected
If the unit is in STANDBY or BYPASS mode, one of the two input voltage frequency values
may be selected
If the unit is in STANDBY or BYPASS mode, one of the two BYPASS mode options may be
selected