NexLog Recorder User Manual v2.2.0
71
feature to be utilized and a User Defined Field (Recording: User Fields) must be
added to the database to hold the RadioID. The field should be called RADIO_ID
Audiocodes T1/E1 Board Passive Board
These boards come in Single Port and Dual Port versions for recording one or
two T1 or E1 Trunks. The Dual Port versions simply provide the same
configuration options separately for each Port. For each port the options are as
follows:
Port Type
: Whether the Trunk is a T1 or E1 (must be the same on both ports on
a dual port board)
Protocol
: What Protocol is used on the T1/E1. Options are None (Recording is
VOX Only), ISDN, or CAS/RBS
Protocol Variants
:
Line Coding
: Whether the Line coding on the T1/E1 is AMI, B8Zs or HDB3
Framing Format
: Whether the Framing format is SF,ESF, G704, or CRC4
Eventide Voice Over IP Gateway Virtual Boards
See Appendix F: Recording VoIP or RoIP Calls.
Eventide Local RTP / RoIP Virtual Boards
See Appendix F: Recording VoIP or RoIP Calls.
No changes made to settings on the 'Edit Board' page will take effect until the
'Save' button is clicked
Edit Channels
Clicking on the gear icon next to a channel allows you to set channel level
parameters. Note that most of the common parameters for a channel can be
configured in the main table channel table as well by clicking on a cell.
Figure 41
—Editing the channel name inline
In addition to editing channel information inline you can also edit it by clicking
the gear icon.