Eventide MicroPitch Delay, Краткое руководство пользователя

Страница: 3 / 6

Load Preset
MIDI Messages
20 Mix
Pitch B
Pitch A
Depth
Rate/Sens
Pitch Mix
Mod
Feedback
Out Lvl
Morphing from Heel to Toe
Enter Save Mode by pressing and holding the TAP
Button, then a MIDI program change message will save
a Preset to the Preset Slot of the given value 1-127.
21
22
23
24
25
26
27
28
Tone
Delay A
Delay B
29
30
31
CC
*Use a MIDI Converter Box
or a DIN to TRS or TRS cable
CC PRIMARY SECONDARY
Save Preset
Expression Pedal
Note: To use an Expression Pedal, the Exp Pdl Jack
must be set to either [EXP] or [EXP + AUX]. See
System Setup to select.
An Expression Pedal can be used to change any
grouping of knob Parameters in one smooth
gesture. Programming an Expression Pedal is
easy. You simply need to set end points for Heel
& Toe. Here’s how:
1. Press Pedal fully Heel down.
2. Adjust any combination of the Parameter
control knobs.
3. Press Pedal fully Toe down.
4. Adjust any combination of the Parameter
control knobs.
5. Save it or lose it. See “Saving a Preset.”
Clear Expression Pedal Mappings
To clear the Expression Pedal mappings for the
knobs, hold the ACTIVE Footswitch and, while
holding, press the ACTIVE Button until the Preset
Ladder LEDs flash twice.
MIDI program change message loads the Preset
from the Preset Slot of the given value 1-127.
Note: The bottom two Ladder LEDs will be lit when
Presets 6–127 are selected via MIDI or Device Manager.
Receive/send using the USB Port or Exp Pdl Jack*.
CC 4: Expression Pedal
CC 9: TAP TEMPO
CC 14: ACTIVE/BYPASS (>=64 is Active)
CC 15: FLEX (doubles Pitch A & B, >=64 is ON)
Parameters: CC Messages Map