Eventide 141242, Руководство пользователя

Страница: 125 / 132

C. MIDI FUNCTIONALITY
On the H9000, MIDI is always on and received simultaneously by all the USB ports as well as the
MIDI-in DIN connector.
The H9000 does not currently transmit or respond to any SysEx messages.
The H9000 does not currently output MIDI clock informa
ti on from its USB ports or MIDI-out DIN
connector.
Controller func
ti onali ti es such as omni-channel, note mode, pitch bend range etc. are made at the
controller-mapping level, rather than globally.
MIDI Program changes are handled through Scenes mode.
The following ac ti on types are available for note-based MIDI controllers:
Velocity Uses the velocity of the selected note as the control value.
Trigger Emits a trigger pulse whenever the note is played.
Toggle Flips between the min and max values when the note is played.
Note Number
Uses the whole range of the keyboard, using the note number as the
control value.
Note to Hz
Uses the whole range of the keyboard, and emits a control value equal
to the actual frequency of the note being played.
When using Note to Hz, the “Range” dialog contains 2 range knobs:
Control Range: Selects the range that controller will respond to from 0-127.
Parameter Range: Determines how the control range value is applied to the parameter it’s a
ff ec ti ng.
For example, you could use half of the Control Range to sweep the full range of a parameter, or you
could use the full Control Range to sweep half the Parameter Range.
1.
2.
3.
4.
5.
1.
2.
C. MIDI FUNCTIONALITY
125