Eventide 141242, Руководство пользователя

Страница: 12 / 132

All the Scene Maps found in Scenes mode, along with current ac ti ve map index.
LED meter mappings.
The state of Global Mute/Bypass.
Metadata (Name and ID are the most relevant to the user).
1.3.2. FX Chain
The H9000 allows you to chain up to four algorithms together into a custom FX Chain . The FX chain is
fed by audio inputs, then the audio is routed through up to four algorithms, and then fi nally to audio
outputs.
You are free to decide which algorithms are included in the FX chain, the order in which they process the
audio, and even determine aspects such as separate parallel and series audio paths.
FX Chain presets save:
Everything contained within each algorithm preset for all the algorithms present in the FX chain
General parameter values related to the en
ti re FX chain container (mix, mute/bypass, input/output
gains)
Addi
ti onal mappings of these FX chain parameters to MIDI controllers
All rou ti ng informa ti on internal to the FX chain (from the FX chain inputs, to/between algorithm
containers, to the FX chain outputs). No physical I/O informa ti on is included
Func ti on values, as well as mappings of the actual Func ti on knobs to external controllers
Metadata (Name and ID are the most relevant to the user)
1.3.3. Algorithm
Over many years, Even ti de has created a vast library of audio processing rou ti nes, which exist as e ff ects
processing “modules”. Some of these are simple, such as a low pass fi lter, a limiter, a compressor, etc.,
while others are more complex, such as an FFT or a reverb network.
An Algorithm in the H9000 is a combina ti on of some of these modules, and of certain variable values
associated with the modules that make up that algorithm. The designer of the algorithm might choose to
set some variables of some modules to a speci
fi c value that cannot be changed by the user, while
allowing that user to change the values of other variables.
•
•
•
•
•
•
•
•
•
•
12
1. INTRODUCTION