5
CONTROL BOARD OPERATION
Use Up and Down button to select your desired operation, then press Enter to confirm.
DMX Addressing:
After select the "DMX Address" and press Enter, then use Up and Down to set the desired DMX address (001~512),
press "Enter" again to confirm.
DMX Modes (Three DMX modes option)
After select the "2.DMX Channel" and press Enter, then use Up and Down to set the desired DMX mode CHXX
press "Enter" again to confirm.
Sound Mode
Entered "Sound mode", use <UP> and <DOWN> to set the sensitivity Sen 000 ~ Sen 100, press Enter to confirm.
Manual Color Mode
This mode allows the user set intensity of each colour separately to get endless color mixing from the control
board without DMX controller to set the device to run strobe desired.
Entered user mode, use <UP> and <DOWN> to select the " R / G / B / W " for Colors intensity or "S" for strobe
Use <UP> and <DOWN> to set the colors intensity values " 0 ~ 255" or Strobe speed values "000 ~ 100"
(Freeze, Slow ~ Fast), then press "Enter" to confirm.
Press the Menu until one of the following displayed:
Display 12x3
Display 12x8
Function
1.DMX Address
1.DMX Address
To set DMX address
2.DMX Channel
2.DMX Channel
To set DMX channel modes:
12x3 - CH03, CH05, CH06, CH07, CH09, CH12, CH18, CH36
12x8 - CH04, CH06, CH08, CH09, CH12, CH16, CH24, CH48
3.Dimmer Curve
To set dimmer speeds: <01> , <02>, <03>, <04>
3.Sound Mode
4.Sound Mode
To set sound active mode and the sensitivity (S000 ~ S100)
4. Static Color
5. Static Color
To set static colors: Static Color
12x3 - R, G, B, GB, RG, RB, RGB
12x8 - R, G, B, W, GB, RB, RG, RGB, RW, GW, BW, RGW, RBW, GBW, RGBW
5.Manual Color
6.Manual Color
To set user mode intensity of R, G, B separately for color mixing and strobe rate (S000-S100).
6.Auto Program
7.Auto Program
To set built-in automatic programs: (12x3, Pr 01 ~ Pr 11)(12x8 , Pr 01 ~ Pr 12)
and speeds <Speed 000 ~ Speed100>
7.Master/Slave
8.Master/Slave
To set Master/Slave modes
Содержание PIXBAR12x3
Страница 4: ...4 Lux Chart Dimensions ...