www.event-lighting.com.au
5
Purple
WDMX G4 Transmit
Yellow
GZ Receive (Receiver Only)
Using WDMX Mode
Transmitters
Press the button to connect all unconnected receivers in the coverage area.
Press the button for 3 seconds to disconnect all receivers in the coverage area.
Receivers
Press the button for 3 seconds to disconnect the device from the transmitter it is currently
connected to.
Note:
The colour of the light will indicate the group. Refer to Table 2 below.
Note
: The receiver will not connect with a new transmitter unless it is disconnected first.
Table 2
WDMX Status Indicators
Protocol
Action
Description
W-DMX Receive
White
No connection
Red
Deleting Connection
Red Fast Flash
Connection Lost
Green Fast Flash
Connecting to Transmitter
Green Slow Flash
Connected but no DMX signal
Green
Connected with DMX signal
W-DMX Transmit
Red
Deleting All Receivers
Blue Fast Flash
Connecting with the receivers
Blue Slow Flash
No DMX input
Blue
Transmitting DMX
Using EL/GZ Wireless DMX Mode
Changing Channel Group
Press the button to display the current channel group being used.
Press the button again to cycle through the groups. The colour of the light will indicate the group
as shown in Table3.
Table 3
Status Indicators
Protocol
Action
Description
ELDMX / GZ
Solid Colour (Red, Green,
Blue, Yellow, Cyan, Purple,
White*)
1 of the 7* colour groups
(*7th white only in GZ mode, 6 in ELDMX mode)
Flashing Red
Transmitting DMX
Flashing Green
Receiving DMX
