www.event-lighting.com.au
4
CONTROL BOARD OPERATION
Press the Menu until one of the following had been displayed:
Display
Function
1.DMX Address
To set DMX address
2.DMX Channel
To set DMX channel modes:
4x1 Models - CH 03, CH 05, CH 09, CH12, CH17
2x1 Model - CH 03, CH 05, CH 06, CH09, CH11
3.Dimmer Curve
To set dimmer speeds: 01, 02, 03, 04, 05
4.Sound Mode
To set sound active mode and the sensitivity (Sen 000 ~ Sen100)
5.Static Color
To set static colors: R, G, B, RG, GB, RB, RGB
6.Manual Color
To set intensity of R, G, B separately for color mixing and strobe rate
7.Auto Program
To set built-in automatic programs and speed 000 ~100
8.Master/Slave
To set Master/Slave modes
9.Factory Set
To recover to manufactory default
Use “Up” and “Down” button to select your desired operation, press “Enter” to set all function
Set DMX address
After select the "DMX Address" and press “Enter”, then use “Up” and “Down” to set the desired DMX address,
press "Enter" again to confirm.
Set DMX modes
After select the "DMX Channel" and press “Enter”, then use “Up” and “Down” to set the desired DMX mode,
press "Enter" again to confirm.
Set Dimmer curve
After select the "Dimmer Curve" and press “Enter”, then use “Up” and “Down” to set the desired dimmer curve,
press "Enter" again to confirm.
