15
www.event-lighting.com.au
More functions
-
RDM. RDM stands for “Remote Device Management”, with this function, users can realize remote control of the
device, such as remotely changing DMX address, reverse pan/tilt setting, check a lot of useful information such as
temperature, power consumption, fan speed. Etc. Every single device has a unique RDM code programmed at
manufacture to distinguish from each other. It is not recommended for users to change this code.
-
Software upgrade function via DMX cable. If there is any new firmware for this device, it can be upgraded simply via
a software upgrade box, no need to change any mechanical parts. The upgrade box is not included in the package,
if need any further assistance please just contact your authorized dealer.
-
Hibernation. The device will enter sleeping mode if activated after a period of disconnecting DMX signal to save the
power consumption, and will return immediately as soon as the DMX signal is sent again.
-
Display back-up communication IC. There is a back-up communication IC installed in the display PCB, so users
could replace at once if the original one is broken.
-
Display flip. By press up and down button for more than 3 seconds, the display will flip automatically, this function is
useful to read menu conveniently when device is hanged.
Technical Specifications
Power
- Input Voltage: 100~240V AC, 50/60 Hz
- Power Consumption: 270W
- Connection: Neutrik® PowerCON – In / Out
Photometrics
- Light Source: Advanced 8000K 190W White LED Module
- Beam Angle: 12°
- Output: 15,400 lumen, 35,420lux on @2.5M
- PWM: 1,200 Hz
- LED Lifespan: 60,000 hours
Effects
- Dimming: 0 ~ 100%
- Strobe: 0.5 ~26 Hz
- Focus: Electronic Linear
- Prism: 3-facet, 8 facet & Frost
- Iris: Yes
Movement 8 / 16 bit Auto Reposition
- Pan: 630°( 3.2 sec) or 540°( 2.9 sec)
- Tilt: 233°(1.9 sec)
Colour 8 C Open
Содержание M1S190W
Страница 4: ...4 www event lighting com au ...
