www.event-lighting.com.au
4
•
Start playback by pressing
Enter
while
Start Play
is highlighted. Press
Enter
again to
stop playback. Playback will also stop automatically after the show is over if
One Play
mode is selected.
Only one show can be played at a time. While playing, external triggers and other active
triggered shows will be disabled.
Important: Remove the DMX input cable while in this mode to avoid data collision.
Note: At least one show must be recorded before this function is available. See
Record Show
below for details.
Record Show
Record a show using a DMX controller.
Name the show by pressing
Enter
while
Name
is highlighted. To change the name, use the
Enter
key to select a character, and
Up
and
Down
to change that character. Once the desired
character is displayed, press
Enter
to confirm. The name can be up to 11 characters.
•
Once the name is inputted, press
Enter
to save it.
Select a recording mode by pressing
Enter
while
Mode
is highlighted. Press
Up
or
Down
to
select between the following options:
•
Manual: Start and stop the recording manually.
•
Semi-Auto: The recording will automatically start when the value of any DMX channel is
non-zero and Blackout is not active on the DMX controller. The recording must be
manually stopped.
•
Auto: The recording will automatically start when the value of any DMX channel is non-
zero. The recording will automatically stop when the value of all DMX channels are zero,
or Blackout is activated on the DMX controller.
Press
Enter
on
Start Record
to start the recording. If the status displays
Waiting Start
, press
Enter
again to start the recording.
Press
Enter
on
Stop Record
to stop the recording. After it is stopped, it will be saved
automatically.
Delete Show
Delete a previously recorded show.
Select the name of the show you want to delete using
Up
and
Down
, then press
Enter.
The
Delete Show
button will now be highlighted, press
Enter
again to confirm the deletion or
Menu
to cancel.
Important: Once a show is deleted, it cannot be recovered.
Trigger Event
Change trigger event settings.
Press
Up
or
Down
to select between available triggers. Press
Enter
to view and edit the
parameters of the selected trigger. The following parameters are available:
1.
Status. Enable or Disable the trigger. Press
Up
/
Down
to switch between the options.
2.
Rename. Rename the trigger. Press
Up/Down
to select a character,
Enter
to select that
character, and
Up
/
Down
to change that character. Once the desired character is
displayed, press
Enter
to confirm.
3.
Show. Assign a selected show to start when the trigger is activated. Press
Up
/
Down
to
select between the available shows, and press
Enter
to confirm.
