3
Safety Instructions
WARNING
• Do not open this device, there is no user-serviceable parts inside. Risk of electric shock.
• Do not look at the light source when the device is on.
• CAUTION: This unit's housing may be hot during and after operation.
• Install this device in a location with adequate ventilation, at least 20 inch (50 cm) from adjacent surfaces.
• Do not leave any flammable material within 50 cm of this unit while operating or connected to power.
• Use a safety chain when mounting this device overhead.
• Do not operate this device outdoors or in any location where dust, excessive heat, water, or humidity may affect it.
• Do not operate this device if the housing, lenses, or cables appear damaged.
• Do not connect this device to a dimmer or rheostat.
• ONLY connect this device to a grounded and protected circuit.
• ONLY use the hanging bracket to carry this device.
• In case of a serious operating problem, stop using immediately.
• The maximum ambient temperature is 104° F (40° C). Do not operate this device at higher temperatures.
• Do not point this laser toward people or crowds.
• Do not point this laser toward any area where you or the operator do not know where the beams are being directed.
• Use aperture cover whenever not in use.
• Use the key to lock the laser to avoid unauthorised use.
• Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser light.
• This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes.
Power Input
This device has an auto-switching power supply work with input voltage range of 100~240 VAC, 50/60 Hz.
Product Installation
This device can be mounted in many orientations provided each individual device is secured by the use of correct
mounting bracket.
This device should be directed above the heads of people and do not direct it toward the line of sight of people
Refer to the diagram below
Use a safety chain when mounting this device overhead.
