Event Lighting BM1S50W, Руководство пользователя

Страница: 10 / 13

www.event-lighting.com.au 9
96 127 Shutter open
128 159 Pulse effect, slow to fast
160 191 Shutter open
192 223 Random strobe effect, slow to fast
224 255 Shutter open
10 8 0 255 Dimmer Dimmer 0%..100%
11 9 0 255 Focus In (near) to out (far)
12 10
0 5
Prism
Off
6 127 On
128 255 Forward spinning, slow to fast
13 11
0 19
Special
Function
TBD
20 39 TBD
40 59 Enter power saving mode
60 79 Exit power saving mode
80 84 Reset all
85 87 Reset pan/tilt
88 90 Reset colour
91 93 Reset Gobo
94 96 TBD
97 99 Reset other
100 109 Internal Program 1
110 119 Internal Program 2
120 129 Internal Program 3
130 139 Internal Program 4
140 149 Internal Program 5
150 159 Internal Program 6
160 169 Internal Program 7
170 179 Internal Program 8
180 189 Internal Sound Program 1
190 199 Internal Sound Program 2
200 209 Internal Sound Program 3
210 219 Internal Sound Program 4
220 229 Internal Sound Program 5
230 239 Internal Sound Program 6
240 249 Internal Sound Program 7
250 255 Internal Sound Program 8
The device is controlled by universal DMX 512 protocol, DMX address is the start channel used to receive instructions
from the external controller. For independent control, each fixture must be assigned its unique address control channels.
For example, this device has two channel modes: 13/11, if we set the mode at standard 13 channels mode, and there
are several models need to be independently controlled, we just simply address first fixture at 1, and second fixture at
14, third one at 40, etc.
-
If the devices have the same address, they will behave synchronically.
- Display is flashing when no DMX signal is received.