Studio Pro 17 STP/RM
Installation and Operating Manual
North American Model
Jan 2019
Page
5
of
10
Kiln Setup and Placement
Kiln Location
Place your Studio Pro 17 in a location that offers a level, non combustible surface. The Studio Pro 17 should be placed no closer than 12” from
any wall or 48” from any ceiling surface in all opened and closed positions. All flammable and combustible materials should be removed from
the kiln area. Enjoy your kiln safely.
The Studio Pro 17 is designed to be placed either on a counter/bench top or within the included stand. If you choose to place the kiln directly
on a counter or bench top, the counter or bench top must be strong enough to support the weight of the kiln along with any shelving and ware
to be fired. Please note again that the surface on which the kiln is placed should be made of a non-combustible material.
If you choose to place the Studio Pro within the provided stand the location must be strong enough to support the weight of the kiln along with
any shelving and ware to be fired. Please note again that the surface on which the kiln stand is placed should be made of a non-combustible
material.
Stand Assembly
If you have chosen to place the Studio Pro 17 on the stand you will first need to assemble the stand.
Tools Needed: Phillips Screwdriver, 7/16” wrench
Stand Contents: 2 22-1/8” frame angles, 2 27-1/2” frame angles, 4 16” legs, 4 stand feet, 16 bolts, 16 nuts
Place frame angles to form a rectangle. Attach each leg to corners as shown using nuts and bolts, tighten securely.
