B
P
Q
R
Turn the stroller upside down.
Install H-frame
P
to stroller frame legs
Q
until they lock into
place with audible clicks.
Hold the rear wheel/axle assembly so the brake levers
R
face
toward the handle and console.
Slide the brake housings onto the H-frame until they lock into
place with audible clicks.
Pull upward on the rear wheel/axle assembly to make sure it
is locked securely.
ASSEMBLING YOUR STROLLER
8
2
ASSEMBLING YOUR STROLLER
7
Slide the front wheel assembly
S
over the front frame leg
T
until the locking tab
U
locks into place with an audible click.
Pull on front wheel assembly to make sure it is locked
securetly. Repeat for other side.
Note:
To remove each swivel wheel, press locking tab
U
and
slide the wheel off the leg.
T
S
Insert the canopy support tubes
V
into the canopy hinges on
the stroller
W
until they lock into place with audible clicks.
Pull upward on the canopy tubes to make sure they are
locked securely.
Y
C
X
B
Bring the parent’s console
B
up to the parent’s handle
C
.
Gently pull out the side of the console and guide the hole
X
over the post
Y
. Repeat on the other side of the parent’s
console.
Step on the rear brake levers
B
to lock the rear wheels on
the stroller.
To release the brakes, lift up on the brake levers.
USING YOUR STROLLER
1
Pull canopy hoop
A
forward to extend canopy.
Push canopy toward handle to close.
A
W
V
5
4
W
V
Begin assembly of the rear wheels and axle assembly by discarding all packaging.
Slide one wheel
H
and a steel washer
I
onto the axle
J
. Insert a clevis pin
K
through the end of the axle
J
to secure the
wheel, as shown. Make sure the clevis pin is completely pushed through the hole in the axle
, and make sure the brake
housings
L
are facing the same direction.
Note:
An extra clevis pin and steel washer are included for your convenience.
Install the hub cap
M
on the wheel by lining up the notch
N
with the tallest rib
O
in the wheel hub. Insert the hub cap
completely until it snaps into place. Repeat on the other side.
J
H
M
K
J
K
I
I
N
O
L
M
U
5
6