12
IMPORTANT
Always secure the booster seat with the vehicle seat belt
when not occupied. An unsecured booster seat can fly into
and injure other occupants in the event of a crash.
Using the Booster Seat
The shoulder belt
MUST
cross midway between
child’s shoulder and neck.
The lap belt is stretched
low and snug across the
child’s hips.
The shoulder belt
MUST
be
routed properly. See page 14
Child Requirements
Weight:
18 to 49.8 kg (40 to 110 lbs)
Height:
110 to 145 cm (43.3 to 57
inches) tall
AND
the tops of the child’s
ears are at, or below, the top of the child
restraint headrest.
Age:
At least four years old
13
1. Secure booster seat to the vehicle seat.
Make sure the bottom and back of the booster seat
are touching the vehicle seat and back.
2. Place the child in the booster seat.
Make sure the child’s back and bottom are flat against
the back and bottom surfaces of the booster seat.
3. Secure child and booster seat to vehicle seat.
a
Stretch the lap/shoulder belt across the child and
fasten the buckle.
a
The shoulder belt MUST be routed properly (p. 14).
a
Make sure the shoulder and lap belts are threaded
under the red lap belt guide
.
4. Check your work.
Make sure the lap belt is stretched low and snug
across the child’s hips, within the belt guides, and
fastened into the buckle. The shoulder belt must cross
the child midway between his/her shoulder and neck.
Booster Installation Checklist
WARNING
•
The shoulder belt
MUST NOT
cross the child’s neck or fall
off the child’s shoulder. If you cannot adjust the shoulder
belt to properly lay midway between the child’s shoulder
and neck
AND
at or above the shoulder, try another
seating location or do not use the booster seat
.
To make installation easier, watch the installation
video of this booster seat at
www.evenflo.com
.
T
IP
!
T
IP
!
