background image

4

LP GAS CYLINDER (TANK) SPECIFICATIONS AND INSTALLATION:

• 

Grill is hot when in use. To avoid burns:

 

 

• 

DO NOT attempt to move the grill.

 

• 

Block the wheels so the unit does not accidentally move.

 

• 

Wear protective gloves or oven mitts.

 

• 

DO NOT touch any hot grill surfaces.

 

• 

DO NOT wear loose clothing or allow hair to come in contact with grill.

• 

Not for commercial use. DO NOT use this grill for anything other than its intended purpose.

 USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR GAS GRILL.

FAILURE TO ADHERE TO THE  SAFETY WARNINGS AND  GUIDELINES  IN THIS  MANUAL 

COULD RESULT IN SEVERE BODILY INJURY OR PROPERTY DAMAGE.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

WARNING

• 

ONLY connect this grill to a Type 1 cylinder valve. The Type 1 valve can be identifi ed with the 
large external threads on the valve outlet.

• 

DO NOT connect to a propane cylinder exceeding a 20 lb. (9.1 kg) capacity.

• 

DO NOT connect to a cylinder that uses any other type of valve connection device.

• 

Inspect the propane tank valve rubber seal for cracks, wear or deterioration prior to use. A 
damaged rubber seal can cause a gas leak, possibly resulting in an explosion, fi re or severe 
bodily harm.

• 

Turn off the cylinder valve when your grill is not in use. 

• 

Handle the tank with care.

• Always 

secure the cylinder in an upright position.

• 

Never connect an unregulated LP gas cylinder to your grill.

• 

DO NOT expose LP gas cylinders to excessive heat or ignition sources.

• 

DO NOT store a spare LP gas cylinder under or near your grill.

• 

Allow only qualifi ed LP gas dealers to fi ll or repair your LP gas cylinder.

• 

DO NOT allow the cylinder to be fi lled beyond 80% capacity.

• 

Read and follow all warnings and instructions that are on the cylinder and that accompany this 
product.

• 

DO NOT store a spare LP gas cylinder (full or empty) under or near your grill. This could cause 
excess pressure to be expelled through the vapor relief valve resulting in fi re, explosion, or 
severe personal injury, including death.

• 

Propane gas is heavier than air and will collect in low areas. Proper ventilation is extremely 
important. Keep the ventilation opening(s) of the LP gas cylinder enclosure free and clear from 
obstructions and debris.

• 

DO NOT insert any foreign objects into the cylinder valve outlet as this could damage the 
rubber seal. Do not use propane tank with a damaged rubber seal. A damaged rubber seal can 
cause a gas leak, possibly resulting in explosion, fi re, severe bodily harm, or death. Inspect 
rubber seal for cracks, wear or deterioration prior to use.

• Always 

keep cylinder (tank) in upright position during use, transit or storage.

DANGER

Содержание GAS1566AS
































Отзывы: