Maintaining the monitor
40
MAINTAINING THE
MONITOR
MAINTENANCE GUIDELINES
To enhance the performance and extend the life of the monitor:
•
When installing or removing the Spectrum Stand or a VESA mount, position the monitor
face-down on a soft area to prevent it from getting scratched, defaced, or broken.
•
Turn the monitor off when not in use. You can substantially increase the life expectancy
of the monitor by using a screen saver program and turning off the monitor when not in
use.
NOTE: A burned-in image on the monitor is not covered under warranty.
•
Do not open the monitor cabinet or attempt to service this product yourself. Adjust only
those controls that are covered in the operating instructions.
•
If the monitor is not operating properly or has been dropped or damaged, contact an
authorized Eve dealer, reseller, or service provider. This includes situations where:
o
the power cord or plug is damaged, cut or frayed;
o
liquid was spilled into the product;
o
the product was exposed to rain or water;
o
the product has been dropped or the housing has been damaged;
o
the product exhibits a distinct change in performance; or
o
the product does not operate normally after following the operating instructions.
•
Disconnect the monitor by grasping the plug firmly and pulling it from the AC outlet.
Never disconnect the monitor by pulling the cord.
•
Slots and openings in the cabinet are provided for ventilation. These openings must not
be blocked or covered. Never push objects of any kind into cabinet slots or other
openings, or spill liquid of any kind onto or into the product.
•
Keep the monitor in a well-ventilated area, away from excessive light, heat, or moisture.