EVE MOONLESS 90, Инструкция по эксплуатации

Страница: 21 / 22

21
REPLACING LIGHT MODULE
•
Cannot replaced the light bulbs, the entire light module has to be replaced .
•
When changing the light modules, the contacts are live .
•
Before changing the light module ( s ) , unplug the appliance from the mains or switch off the circuit breaker in
the fuse box .
•
Remove the grease filter and carefully remove the 2 screws from the front plate ( a cross headed screwdriver
will be needed to remove the screws ).
•
Disconnect the terminal of LED light .
•
Press LED light on the back of the front plate, take the LED light out .
•
Replace the lamp ( commercially available LED lamp ( max . 1 . 5w ).
•
Press LED light on the front of front plate, install the LED light on the front plate .
•
Connect the terminal of LED light and light leads .
•
Carefully fasten the 2 screws on the front plate ,reinstall the grease filter .
The European directive 2012 / 19 / EU on Waste Electrical and Electronic Equipment ( WEEE ) , requires that
old household electrical appliances must not be disposed of in the normal unsorted municipal waste
stream
. Old appliances must be collected separately in order to optimize the recovery and recycling of
the materials they contain, and reduce the impact on human health and the environment .
The crossed out “ wheeled bin ” symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected .
Consumers should contact their local authority or retailer for information concerning the correct disposal
of their old appliance
.
Lamp Type Max Power Voltage Picture ILCOS D code
LED modules,
separate ballast 1.5 w DC 12V DSR - 1 . 5 - S - 70
DISPOSAL OF OLD ELECTRICAL APPLIANCES
LIGHT REPLACEMENT ( Completed by professionals )