TS
108
TS
107
Volume Mode
10
OPERATION
independently from the satellites. This allows you to strike the right
balance between subwoofer and satellites. The LED ring indicates the
volume setting.
-80 dB
0 dB
-8 dB
-12 dB
-20 dB
-48 dB
1 Step = 2 dB
(1 LED = 4 Steps)
1 Step = 1 dB
(1 LED = 4 Steps)
1 Step = 0.5 dB
(1 LED = 4 Steps)
1 Step = 0.5 dB
(1 LED = 4 Steps)
1 Step = 0.5 dB
(1 LED = 2 Steps)
Both controls feature the exact same response curve, which is not linear.
The increments become finer as the volume increases:
-80 dB (minimum) to -48 dB:
2 dB
-48 dB to -20 dB:
1 dB
-20 dB to 0 dB (maximum):
0.5 dB
•
Subwoofer Mute
To Mute the subwoofer, press briefly the Subwoofer Volume control. All
LEDs will turn off, except for the left-most LED, which lights up dimly.
!
To exit the Subwoofer Mute mode press the Subwoofer Volume control
once again. The subwoofer will return to the volume level it had before
being muted.
•
System Mute (only when using the XLR ins & outs)
To Mute the whole system (sub satellites), turn the System Volume
control counter clockwise until you reach the minimum level. When the
LED on the left end of the System Volume control lights up dimly the Mute
mode is activated.