EVC electronic GmbH
-4-
BSL100 Manual
The BSL100 Module
Pict. 1: A typical arrangement on BOSCH ECUs: BSL100 module, BSL130 probe and bootpin-
probe.
Please first connect your BSL100 module
with your PC or notebook via the USB
cable.
The lower of the both blue LEDs on the
front panel now starts flashing.
The BSL100 module has no own power
source. It is an USB device and obtains
Its power via the USB cable.
If the BSL100 module is connected to an
ECU, the upper of the both blue LEDs
indicates that a data transfer is in
progress.
Pict 2: The BSL-module is always connected to the
USB cable first.
Pict. 3: The BSL100 has etablished a data connec-
tion to an ECU.
