EVBox BusinessLine, Руководство по установке и пусконаладке

Страница: 37 / 46

LED ring color What it means What to do
LED ring yellow.
The car is fully
charged.
• Stop the charging session using the
authorization method used for activation
(for example, charge card or key fob).
• Unplug the charging cable.
LED ring flashing
yellow.
Charging session is in
queue (applicable for
Smart Charging only).
When power becomes available, charging will
start or resume and the LED ring will show blue.
LED ring red.
An error has occurred.
Check Troubleshooting on page 33 for a
solution.
LED ring flashing red.
The charge card or
key fob is not
authorized.
• Authorize the user. See Commissioning on
page 29 .
• Contact the charge card service operator if
necessary.
• A Satellite charging station has become
disconnected from the Hub charging
station.
A Satellite charging
station has become
disconnected from the
Hub charging station.
Check the Hub-Satellite RS485 network
connection. See
Connect Hub-Satellite network
cables on page 27 .
LED ring flashing
purple.
The Hub charging
station is in Bluetooth
pairing mode and
ready to pair with the
EVBox Connect app.
See Commissioning on page 29 .
5.3. Troubleshooting
Troubleshooting must only be done by a qualified electrician unless otherwise stated. Incorrect
installation, repairs or modification can result in danger to the user and may void the warranty and
liability.
This is a general troubleshooting guide listing the most common issues. If you are not able to solve an
issue, visit
www.evbox.com/support for further help from our service pages and support team.
5. Operation instructions
EN
33