•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
5. Recycling the ba
tt
eries and cells - mandatory informa
ti
on required by law
a) regarding the way of providing take-back or separated collec
ti
on; for this purpose, in a way available
for the end user, the producer publishes a current list of take-back and separated collec
ti
on loca
ti
ons with
at least a name of the place and its address.
Take-back and separated collec
ti
on loca
ti
on i4wi
fi
a.s., Pr
ů
myslová 11, Praha 10
b) regarding any nega
ti
ve e
ff
ects of materials used in the ba
tt
eries to the environment and human health
The ba
tt
eries and cells contain chemicals that may have nega
ti
ve e
ff
ects to the environment and human health.
c) regarding the meaning of the symbol for take-back and separated collec
ti
on and regarding the meaning of marking.
THIS IS THE SYMBOL FOR TAKE BACK OR SEPARATED COLLECTION.
DO NOT THROW THE BATTERIES TO HOUSEHOLD WASTE, THEY NEED TO BE
RETURNED AT A TAKE BACK AND SEPARATED COLLECTION LOCATION.
Global World Logis
ti
c Ltd., EU-VAT ID: CZ682998344, as an en
ti
ty authorized by the producer for EU, thus
proclaims that the device conforms to basic requirements and any other relevant provisions of Decree-Law No
17/2003 Coll. establishing technical requirements for low-voltage electric devices (or LOW VOLTAGE DIRECTIVE
2006/95/EC). This statement is issued on the basis of documents presented by the producer.
www.EVBIKE.cz
Dovozce:
Global World Logis
ti
c Ltd.,EU-VAT ID: CZ682998344
Do not deform. The ba
tt
eries should not be pressed, pierced etc.
Do not dispose of in
fi
re.
Do not expose to water or excessive humidity
Do not keep within the reach of children. Especially ba
tt
eries that could be swallowed need to be kept out
of their reach. Also children must not be allowed to replace the ba
tt
eries without the supervision of an adult.
Do not encase or do any other modi
fi
ca
ti
ons. Encasement or any other modi
fi
ca
ti
on to the ba
tt
ery may cause
blockage of the safety ven
ti
la
ti
on mechanism. Any modi
fi
ca
ti
ons need to be consulted with the reseller.
Ba
tt
eries that are not used need to be stored charged and kept out of reach of any metal subjects that could
cause short circuit. The pieces that are already unpacked should not be mixed and stored together.
Avoid extreme humidity (over 95%). High temperature or humidity may impair the characteris
ti
cs
of the ba
tt
ery and/or the corrosion of its surface.
Do not store / expose the ba
tt
ery to the direct sunshine, places exposed to rain, excessive heat, in proximity
of radiators or water heaters.
Store the ba
tt
eries in a well ven
ti
lated and dry environment, ideally enclosed in a protec
ti
ve package.
When storing, keep the temperature within the range speci
fi
ed for the speci
fi
c cell
Do not mix it with some other materials.
Do not stack the cardboard boxes with the ba
tt
eries. Stacking could lead to deforma
ti
on of the ba
tt
eries
in the lower layers and subsequent electrolyte leakage.
For any further transport / manipula
ti
on choose such a packaging material and method of packing that would
prevent from crea
ti
ng an uninten
ti
onal electric contact and corrosion of the terminals, assuring protec
ti
on
from the elements and any mechanical damage.
Manipulate with the boxes considerately. Coarse manipula
ti
on may cause short circuit or damage.
Keep a proper circula
ti
on of supplies, keep the FIFO system.
Store the ba
tt
eries charged and take a measure of their voltage every 2 months. If the value is near its
minimum, recharge the ba
tt
ery.
Operate the ba
tt
eries under supervision or under a constant monitoring by a protec
ti
on and control system.
Avoid overcharging and total discharging.
