5
PHC PARALLEL HYBRID EVAPORATIVE CONDENSERS
W
H
W
H
Figure 4
— D Model Basin Section
24’ (7.3 m) and 26’ (7.9 m) Long
Extended Lifts
The recommended method for extended lifts is to use safety slings under the unit (see
Figure 5
). Spreader bars should always be
used between the cables at the top of the section to prevent damage to the upper flanges.
NOTE:
The lifting points should be used for final positioning only and for lifting where no danger exists. If they are used for
extended lifts, safety slings and spreader bars should be provided under the sections as shown.
Safety slings, spreaders, and skids should be removed before final positioning of the unit.
SAFETY SLING
Figure 5
— Proper Rigging Method for Extended Lifts
SIDE FLANGE
Single Strip Over
Hole Centerline
END FLANGE
Two Sealer Strips
Overlapping
Figure 6
— Proper Sealer Tape Application
Figure 3
— S Model Basin Section
9’ (2.7 m), 12’ (3.6 m) and 18’ (5.5m) Long
