EvaKool DOWN UNDER Series, Руководство по обслуживанию

Страница: 10 / 24

10
DOWN UNDER
SERIES
COMPRESSOR:
In our range of Australian built Evakool fridges we only use and recommend SECOP
compressors, originally designed and built by Danfoss in Germany, they are the industries
leader in design and performance in 12 Volt compressors .
These compressors are multi speed allowing for Evakool fridges to be programmed to ‘soft
start’ to reduce high starting current, ultimately reducing power consumption . Every time
the fridge starts the compressor is programmed to start at its slowest speed (2000 RPM) .
Once the fridge is up to speed, the system is primed for 2 minutes and it will then set to the
selected speed (Max or Eco) .
Secop compressors have a fault finding system built into the electronic module, listed
below are the codes and their faults .
LED
FLASHES
ERROR TYPE
5
Thermal cut-out or electronic unit: If the refrigeration system has been too
heavily loaded, or if the ambient temperature is high, the unit will run too hot .
4
Minimum Motor Speed Error: If the refrigeration system is too heavily loaded,
the motor cannot maintain minimum speed at approximately 1,850 rpm .
3
Motor Start Error: The rotor is blocked if the differential pressure in the
system is too high (>5 bar) .
2
Fan over-current cut-out: The fan loads the electronic unit with more than
0 .5A avg .
1 Battery protection cut-out: The voltage is outside the cut-out setting .
Wiring harness to the Secop Module, see below the color codes to each terminal .
For more information: https://www .
portable-box-compressor .com/
userdata/pdfs/secop_portable_box_
compressors_10-2015_desb100c102 .pdf .