Please
read these
instructions
before use
Bedside Commode Chair
Set-up and OperatiOn
The Bedside Commode is manufactured from durable
powder-coated steel with a vinyl padded toilet seat,
backrest and armrests for comfort and pressure relief.
The toilet seat is front hinged for easy access to the
removable pan with lid. Seat, pan and lid can be easily
removed for cleaning.
Some minor assembly required.
Adjusting the height
The commode is height adjustable to match
individual user requirements. A series of holes
along each leg allow seat height to be adjusted
from 500 mm to 610 mm.
A brass locking button is used
to secure the height of each leg.
Press in the locking button to disengage, and
turn the leg slightly so the button is no longer
aligned with the holes. Move the leg up or
down to your ideal height setting, then turn
the leg back to align the locking button with the
nearest hole. The locking button must be fully
engaged and protruding through the height
adjustment hole to ensure a positive lock.
Repeat for all four legs, adjusting height
evenly or individually to match an uneven
floor surface.
Before use, test that locks are fully engaged and
ensure the commode is stable and resting firmly on
the floor’s surface.
Ideal seat height
Ideal height is when the user’s
feet rest flat on the floor, with
thighs parallel to the ground or
slightly angled with hips just above
knee level. Knees should never
project above the upper leg.
Box Contents and Inspection
Carefully remove all components from the box,
remove all packaging and plastic wrapping and check
items against the list below. Any damaged or missing
components should be reported to your authorised
dealer or Evadale Healthcare.
Set-Up and Operation
Instructions (this guide)
chair
pan with lid
toilet seat
padded toilet seat cover
wire pan holder
Assembly
To assemble the commode, hook
the wire pan holder to the base of
the frame (wider hooks to the front;
narrow hooks to the rear). Hang the
pan over the wire pan holder, with
the rim handles positioned to the
sides.
To attach the toilet seat, position
the clips over the front of the frame
and push down to secure. The loose
padded toilet seat cover can be
used as required – fit over the toilet
seat with the wider edge to the front.
Make sure the seat is firmly secured
before using the chair.
