Evac 6540372 Скачать руководство пользователя страница 3

Страница: 3 / 4

EVAC reserves the right to make alterations to this specification without prior notice.

OPERATION & MAINTENANCE

Date: 06 Feb 2018

Doc. 000635-4

6540372 PUMP SE 044A 3 X 220V 50 HZ

6540381 PUMP SE 044A 3 X 690V 60 HZ

6540369 PUMP SE 044A 3 X 380-420V 50 HZ

6540371 PUMP SE 044A 3 X 230V 60 HZ

6541600 PUMP SE 044A 3 X 690V 50 HZ

6540370 PUMP SE 044A 3 X 460V 60 HZ

1) Lubricate the O-ring and the sealing surfaces with

oil.

2) Cover the key way of the pump shaft with adhesive

tape to avoid damage to the O-ring.

3) Push the rotating seal ring together with spring and

retaining ring onto the shaft by using a suitable sleeve

having inner diameter lightly bigger than 25 mm.

5.6 Assembly of rotating seal ring without assembly tool PUR 035

Assembly of rotating seal ring without a special tool is not recommended. However, if it must be done it must

be ensured that spring compression is correct.

Содержание 6540372

Страница 1: ...is equipped with Vortex impeller with no clearance adjustment high quality mechanical seal and electric motor bearings for long life operation Once a year Start pump manually and check that there are...

Страница 2: ...ationary seal ring when removing the rear wall Remove the stationary seal ASSEMBLY TOOL PUR 035 Colour RED ASSEMBLY TOOL PUR 012 ring if it is damaged or worn Removal of stationary ring can be done by...

Страница 3: ...Z 6540370 PUMP SE 044A 3 X 460V 60 HZ 1 Lubricate the O ring and the sealing surfaces with oil 2 Cover the key way of the pump shaft with adhesive tape to avoid damage to the O ring 3 Push the rotatin...

Страница 4: ...end of the spring will go into the groove in the retaining ring 5 Compression of the spring is correct when the distance from surface of the retaining ring to the surface of seal housing is 1 5 mm Se...