04
• • • Setup
• • • Air quality display
Before use, be sure to remove all packaging from the unit
and filters.
Remove the tape from the UV lights.
Replace filters in the same order in which they were
removed.
Position so the sides and back are free from obstructions to
allow for efficient air intake.
Plug in the air purifier to a mains outlet. The standby light
glows red. Power on and choose your settings.
The LCD display gives an accurate readout of the air quality before it is
purified. The number shows the measured size of ‘Particulate Matter’ in
the air down to 2.5 microns. The lower the PM2.5 number, the cleaner
the air.
Blue
0-50
Perfect
Green
51-100
Normal
Purple
101-150
Poor
Red
151+
High Risk
50cm
50cm
10cm
• • Quick start guide
