background image

03. MINIMUM INSTALMENT REQUIREMENTS 

 

INTRODUCTION: 

 

INSTALLATION WITH WALL FUME OUTLET IS PROHIBITED.  INSTEAD THE FUME OUTLET MUST BE ROOF-TYPE AS PROVIDED FOR BY NATIONAL 

REGULATIONS. 

 

Eva stampaggi S.r.l. assumes no responsibility for injury to persons and/or damage to property caused by non-observance of the point highlighted 

above relating to non-compliant products installed. 

Install the stove according to the regulations in force in the country of use. 

 

In Italy, for example, this refers to UNI 10683: 2012, which refers to 4 areas: 

 

a. preliminary activities -

 are under the jurisdiction and are the responsibility of the reseller/installer at the time of the pre-installation inspection. Preliminary 

procedures include: 

  installation site suitability verification; 

  fume evacuation system suitability verification; 

  external air inlet suitability verification. 

At this stage, the product needs to be checked in order that it can be safely operated and that the relevant technical specifications are met. 

The safety conditions must be assessed with a preventive inspection. 

Stoves and fireplaces are heating systems and must be installed safely

 

and comply with the manufacturer's instructions!

 

 

b. installation -

 under the responsibility of the installer. In this phase the 

installation 

of the product and the smoke exhaustion system are considered as well as 

the handling of topics such as: 

 

safety distance

 from combustible materials; 

 

chimney flue construction

, smoke ducts, intubated systems and chimney cowls. 

 

c. issuance of supplementary documentation

 - the responsibility of the installer. 

The release of technical documentation must include: 

  manual of use and maintenance of the appliance and of the components of the system (e.g smoke ducts, chimney flue, etc.); 

  Photocopy or photograph of the chimney flue plate; 

  system manual: (if applicable); 

 

Declaration of Conformity in relation to Ministerial Decree 37/08

 

d. control and maintenance

 - the responsibility of the maintenance technician who must oversee protection and maintenance of the product during its operation 

over time.

 

The operator responsible for checking and maintaining the systems for winter and summer climate control carries out tasks in 

a workmanlike manner

 

and in observance of applicable regulations. The operator, at the end of these operations, must draw up and sign a technical inspection report in accordance with 

the models provided by the provisions of this decree and the implementing rules, in relation to the type and capacity of the system, to be issued to the person who 

signs a copy thereby confirming receipt and reading thereof". 

 

The Purchaser must not carry out any structural modification of the stove. 

Installation and connection must be carried out by the Purchaser and by qualified technical personnel, in compliance with European (UNI 10683) and national 

regulations, local regulations and assembly instructions contained in this Instruction Manual. 

Eva Stampaggi S.r.l. assumes no criminal and/or civil liability, direct and/or indirect, for damage to persons or property resulting from non-compliance with the 

aforementioned provisions of law, assembly instructions, warnings and general safety rules indicated in this Instruction Manual. 

Failure to comply with the installation requirements and/or tampering with the stove can cause: inadequate power and/or abnormal product behaviour, poor smoke 

draught, slow combustion, overheating and fire hazard of the stove, fire hazard of the flue duct, a lack of oxygen in the environment where the stove is located. 

Eva Stampaggi S.r.l. assumes no criminal and/or civil liability, direct and/or indirect for the malfunction of the stove and for damage to persons or property caused 

by non-compliance with the requirements for installation of the stove and/or tampering with it. 

The Buyer must request and retain the certification of compliance of the installation, and the connection of the stove, with the provisions of law. In the absence of 

such certification Eva Stampaggi S.r.l. assumes no criminal and/or civil liability, direct and/or indirect for the malfunction of the stove and for damage caused to 

persons or property, resulting from the use of the product. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Содержание 12.5KW

















Отзывы: