Pre cautions:
1. Read this manual before attempting to install the device. Take special precautions during installation and use tools and
equipment in perfect working order.
2. Do not attempt to disassemble the Siren Box, unless described in the user’s manual. There are no user serviceable parts.
Handle with Care – Avoid striking or shaking.
3.Improper use or storage could damage the Siren Box. Modifying or tampering the device or its internal components can
cause a malfunction and void the Siren Box’s warranty.
The Siren Box will increase your alarm sound. Use in areas where the alarm sound need more loud, and integrated to the system.
Installation
Turn the Siren Box over and adjust the triangle hang tags into the correct position,now you are ready to install.
Find the place that you would like to hang the Siren Box. Use the screws included for wood, or the screws and anchors included for
dry wall mounting.
Low Battery Indicator
The Siren Box offers battery backup using three AAA battery. Remove screws on back and put it into battery holder according to polarity
markings.When the battery voltage reaches a low level, the “Low battery” signal will send to controller until battery is replaced.
TO return your device to factory default:
1. Press and hold ADD Buttom at least 3 seconds while you insert the batteries.
2.Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable.
Adding to Z-Wave network
1) Install the batteries. Visual indicator show status (red - device ready for adding, green - device added),
please remove device from Z-Wave network firstly.
2) Make sure the device is located within direct range of the Z-Wave controller.
3) Follow the instructions for your Z-Wave certified controller to include a device from different manufactures to the Z-Wave network.
4) Once the controller is ready to include your device, triple click the ADD Button located on Siren Box.
5) Siren Box will be detected and added in the Z-Wave network.
Important safeguards
Operation
5) Siren Box will be detected and added in the Z-Wave network.
Removing from Z-Wave network
1) Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.
2) Once the controller is ready to Exclude your device,triple click the ADD Button to exclude it from Z-Wave network.
Note:
1. The association group supports five nodes and lifeline function.
2. This product can be operated in any Z-Wave network with other Z-Wave certified devices from
other manufacturers. All non-battery operated nodes within the network will act as repeaters
regardless of vendor to increase reliability of the network.
ZW15 Siren Box-1pcs
Adapter 5V1A-1pcs
Screw-3 pcs
Installation Operation manual-1pcs
ADD Button
Close Lock
Battery holder
Power input
Siren Box Top
Siren Box bottom without battery
Package content:
