Specifications
Directions
Absorption Rate : 8oz. Per day at 86°F and 80%RH
Technology : Thermo Electric Peltier
Power Adapter : 9V DC; 2.5AMP
Power Consumption : 22.5w
Dimensions : 6in(W) x 5in(D) x 8.75in(H)
Working Environment : > 45°F and 40%RH
Capacity :20oz Reservoir
1.Remove product from packaging
2.Plug in AC/DC power supply into the DC socket
3.Plug power supply into wall outlet
4.Press the On/Off power button at the top of the unit; button will illuminate blue
5.You should feel air blowing from the dry air outlet
6.Once the unit reaches capacity, it will turn off and the light will now illuminate
yellow (full) and will need to be emptied.
7.To empty the water reservoir, press the power to turn the unit off. Remove the water
reservoir and dislodge the drain hole plug, empty the collected water then replace
the drain hole plug to the secure position before returning reservoir to the unit.
8.Press On/Off power button to continue normal operation
Safety notes:
Keep out of reach of children
Only use in the upright position
Ensure at least 12 inches of clearance around all vents for optimal efficiency
Do not tamper or modify the unit. Doing so will void ALL warranty
Questions or Comments?
Call us: 877-382-3790
Email us: [email protected]
Eva-Dry
12157 West Linebaugh Ave #152
Tampa, Florida 33626
Recommended maintenance:
Always ensure the unit is powered off and unplugged before preforming any
maintenance.
Use a soft cloth to wipe any debris of exterior of unit.
Keep all air vents free of debris
It is common for dust to build up in the air vents. Use a soft bristle brush or
compressed air to remove dust and debris from vents.
Once per month or as needed, use a 1 to 1 vinegar or bleach solution to clean the
water reservoir.
