13
5. RIDING ON THE ROAD
5
Starting and Riding
1.
Make sure the seat is installed properly.
2.
Make sure the tiller has been secured properly.
3.
Turn the power switch to “ON”.
4.
Check the battery indicator to see whether there is enough power for your journey. If
you have any doubt about the remaining power, please recharge the batteries before
departure.
5.
Set the speed dial to a position you feel safe and comfortable with.
6.
Check the forward/reverse speed lever works correctly.
7.
Make sure the electromagnetic brake works correctly.
8.
Before riding, ensure it is safe to do in the environment around you.
Attention
1.
Do not push both RH & LH sides of the speed control lever simultaneously. This might
leave you unable to control your scooter.
2. Do not turn the power switch to OFF while riding as this will lead to an emergency stop
and possible risk of accident and injury.
3. Do not set to the highest speeds while riding indoors.
4. Do not adjust the speed dial while riding, a sudden change in speed may cause danger
to you and others, and may cause damage to your scooter.
5. Do not place magnetic devices near the area of the operation handle as this could affect
the safe operation of your scooter. The scooter controller is located under the foot way.
6. Do be careful when riding in heavy traffic or crowded areas.
7.
When operating the vehicle in reverse, beware of people or objects behind you.
Stopping
1.
Release the speed control lever completely. The vehicle will naturally brake and stop.
2.
Turn the power off. Then pull out the key.
Attention
1. The stopping distance will vary with your forward / reverse speed. Therefore please
begin braking as early as you can.
2. When parking your scooter, be sure to park on flat ground and then turn the power to
“OFF” before you dismount.
