Page
13
of
24
www.ev-hub.com.au
2.1.1
Step 1
Using your mobile device, look for a new network. You will have to navigate to your WiFi settings menu and
make sure WiFi is enabled on your device.
Depending on your charger’s firmware, in your Wi-Fi network, you might be shown “hypervolt-ABCD”,
“ABCD” representing the serial number of the unit, or “hypervolt-charger”. Regardless of the option you are
shown, choose it and continue following the steps below.
Connect to “hypervolt-charger” network.
Note 1:
Your phone may prompt you that there is no internet access via the hypervolt- charger network; that
is perfectly expected and you should select to continue to stay on this network.
Note 2:
The network is an open network and will not require you to enter any password.