TROUBLESHOOTING
Part 2: System Assembly
Step 9/10:
If cables are not connected properly an error message appears on the modem. Check
cables/connectors integrity and verify that the cables are connected to the right ports
Part 3: Modem Configuration
Step 17:
If an error message ‘Operation Failed’ is displayed after importing the RF Cluster Table,
check the bin file is the correct one and it is not corrupted. Repeat again step 17 until you have a
success message.
Step 18:
If an error message
‘Value is out of range’
is displayed it means a value is incorrect or out of
range. Check again the values on your Contract Form and then enter the correct ones. Check you
have imported the RF Cluser Tables (Step 17). If the problem persists contact your Service Provider
